A figure recently released by the KCM blog supports what statistics have been suggesting about the rising price of home ownership over time. In short, the cost of homes is climbing, and at the same time, the cost of borrowing money is climbing, causing the total cost of home ownership grow at a notable rate.
KCM compared approximate mortgage interest rates from this time last year to this year, using a 10% increase in price values to allow for the general upswing in housing prices over the past year (many areas going up by double digits). Here is what they found:
With the cost of borrowing money going up right alongside the cost of homes going up, home ownership is only getting more expensive over time. Playing the waiting game, in this instance, will not likely be in your favor.
The Good News
Is it too late? In a word, "no". Home prices are still well below their 2006-2007 peak prices, and it will continue to take some time to reach those levels. Interest rates are also, from a historical perspective, very low. That said, all indicators suggest that home prices are continuing to climb, and with interest rates growing in tandem, the time to act is upon us.
An account of the Real Estate market in Chicago. Recommended reading for homeowners, buyers, sellers, and anyone else with an eye toward real estate.
Tuesday, July 09, 2013
Monday, July 08, 2013
5 Ways to Cut Your Summer Energy Bill
In the hot months of summer, energy bills can skyrocket with efforts to stay cool. Here are Zillow's 5 simple ways to cut your energy bill without undergoing renovations.
Clean your filters
A simple cleaning of your filters can help your air conditioning to run more efficiently. This should be number one on your list, as a clean filter can lower your A/Cs energy consumption by up to 15%!
Some filters can be cleaned, but many have to be replaced. Central air conditioning filters can be located along the length of the return duct. Consider cleaning these monthly during the summer months. Room air conditioning unit filters can be located in the grills that face your house.
Insulate as much as you can
While Chicago residents certainly think about insulation during the winter to keep the cold, sometimes people forget that insulation is just as important during the summer to keep the cold in. Proper insulation can reduce costs by as much as 20%.
What is the best place to insulate? Believe it or not, your attic should be one of the first places you start; temperatures can climb up to 140 degrees during the summer, which will leak down into your home.
Shade your windows
Awnings, window shades, and blinds can be an easy energy-saving tool. While it does not block any actual air from leaking into your home, the shade alone can help conserve your energy.
Awnings are particularly useful in reducing solar heat gain (up to 65% on on south-facing windows, and 77% on west-facing windows). Keeping highly-reflective blinds completely closed on a sunny day can reduce heat by up to 45%. Curtains can help too, but their effectiveness varies depending on fabric type, color, and backing. Drapes with medium coloring and white plastic backing can reduce heat gain by 33%.
Use a Smart Thermostat, and Set it as High as Possible
The ability to program your thermostat can easily help reduce your energy bill. Set your thermostat as high as possible - the smaller the difference between indoor and outdoor temperatures is, the less energy you will be using.
The newest thermostat available, The Nest, is a $250 thermostat which learns your thermostat preferences as you use it. After about a week, it can anticipate when you will change your thermostat and what you will change it to. You can also control it remotely from your smartphone or computer.
Turn it Off and Unplug
Plugged-in devices suck about $100 from your bill every year, according to the United States Environmental Protection Agency. Computers alone can account for 2-3% of your energy bill. Sleep modes do help, but it is even better to flip off a power strip or unplug altogether. Consider the Smart Strip which can sense inactivity and automatically flip switches off.
Clean your filters
A simple cleaning of your filters can help your air conditioning to run more efficiently. This should be number one on your list, as a clean filter can lower your A/Cs energy consumption by up to 15%!
Some filters can be cleaned, but many have to be replaced. Central air conditioning filters can be located along the length of the return duct. Consider cleaning these monthly during the summer months. Room air conditioning unit filters can be located in the grills that face your house.
Insulate as much as you can
While Chicago residents certainly think about insulation during the winter to keep the cold, sometimes people forget that insulation is just as important during the summer to keep the cold in. Proper insulation can reduce costs by as much as 20%.
What is the best place to insulate? Believe it or not, your attic should be one of the first places you start; temperatures can climb up to 140 degrees during the summer, which will leak down into your home.
Shade your windows
Awnings, window shades, and blinds can be an easy energy-saving tool. While it does not block any actual air from leaking into your home, the shade alone can help conserve your energy.
Awnings are particularly useful in reducing solar heat gain (up to 65% on on south-facing windows, and 77% on west-facing windows). Keeping highly-reflective blinds completely closed on a sunny day can reduce heat by up to 45%. Curtains can help too, but their effectiveness varies depending on fabric type, color, and backing. Drapes with medium coloring and white plastic backing can reduce heat gain by 33%.
Use a Smart Thermostat, and Set it as High as Possible
The ability to program your thermostat can easily help reduce your energy bill. Set your thermostat as high as possible - the smaller the difference between indoor and outdoor temperatures is, the less energy you will be using.
The newest thermostat available, The Nest, is a $250 thermostat which learns your thermostat preferences as you use it. After about a week, it can anticipate when you will change your thermostat and what you will change it to. You can also control it remotely from your smartphone or computer.
Turn it Off and Unplug
Plugged-in devices suck about $100 from your bill every year, according to the United States Environmental Protection Agency. Computers alone can account for 2-3% of your energy bill. Sleep modes do help, but it is even better to flip off a power strip or unplug altogether. Consider the Smart Strip which can sense inactivity and automatically flip switches off.
Sunday, July 07, 2013
8 Alternatives to Granite For Your Kitchen
When it is time to remodel a kitchen, most people turn to granite for their countertops. In fact, according to a survey conducted in 2012 by Harris Interactive on behalf of The Marble Institute, 75 percent of homeowners looking to remodel their kitchens within 2 years said they were going to go with granite.
Granite is certainly a good, secure option. It is highly durable and its good looks will last awhile. However, it is still highly expensive and heavy, and requires quite a bit of upkeep.
Zillow has come up with a thorough list of 8 Kitchen Counter Options That Will Make You Forget Granite. Here is a breakdown of their list:
Carrara Marble
- White or blue-grey marble
- Softer than granite
- Does stain and scratch, creating a "warmer" patina as it undergoes the aging process
- Often used in sculpture and building decor, particularly in Italy
Wood
- "Butcher block" is the most common type used, but other woods such as cherry, bamboo, zebra wood and iroko have been used
- Highly durable
- Wear on the wood give the counters a nice patina
- Some maintenance required to prevent drying of the wood
Soapstone
- Smooth, matte, natural stone
- Soft-grey to Charcoal in color
- Acid and heat resistant
- No special cleaners needed
- Oils can be used to enhance the stone's look
Engineered Quartz
- 95% natural quartz, 5% polymer resins
- Super-hard, low-maintenance, natural-looking
- Comes in a variety of colors
- Relatively scratch and heat resistant
Concrete
- Many colorizing and stain techniques available
- Can add embedded stones, tiles, silicone chips to create a unique counter
- Highly durable: scratch-resistant and heat-resistant
- Extremely heavy
- Can be damaged by acidic substances, and must be sealed and maintained to resist stains
Glass
- Versatile and easily customizable
- Can endure high-heat
- Wont stain
- Non-porous, making them very hygienic
- Under-mounted sinks not recommended
Stainless Steel
- Complimentary to many of today's stainless steel appliances
- Stain and heat-resistant
- Can be scratched or dented
- Other metal countertops fall in this category: copper, pewter, zinc
Solid Surfaces
- Can look like natural stone
- Less expensive and require less maintenance than real stone
- Can be created with no seams
- Heat and moisture resistant
- Easy to Clean
- Can be scorched and scratched
If you are looking to remodel your kitchen, give me a call or send me an e-mail and we will put you in touch with some experts in the field.
Granite is certainly a good, secure option. It is highly durable and its good looks will last awhile. However, it is still highly expensive and heavy, and requires quite a bit of upkeep.
Zillow has come up with a thorough list of 8 Kitchen Counter Options That Will Make You Forget Granite. Here is a breakdown of their list:
Carrara Marble
- White or blue-grey marble
- Softer than granite
- Does stain and scratch, creating a "warmer" patina as it undergoes the aging process
- Often used in sculpture and building decor, particularly in Italy
Wood
- "Butcher block" is the most common type used, but other woods such as cherry, bamboo, zebra wood and iroko have been used
- Highly durable
- Wear on the wood give the counters a nice patina
- Some maintenance required to prevent drying of the wood
Soapstone
- Smooth, matte, natural stone
- Soft-grey to Charcoal in color
- Acid and heat resistant
- No special cleaners needed
- Oils can be used to enhance the stone's look
Engineered Quartz
- 95% natural quartz, 5% polymer resins
- Super-hard, low-maintenance, natural-looking
- Comes in a variety of colors
- Relatively scratch and heat resistant
Concrete
- Many colorizing and stain techniques available
- Can add embedded stones, tiles, silicone chips to create a unique counter
- Highly durable: scratch-resistant and heat-resistant
- Extremely heavy
- Can be damaged by acidic substances, and must be sealed and maintained to resist stains
Glass
- Versatile and easily customizable
- Can endure high-heat
- Wont stain
- Non-porous, making them very hygienic
- Under-mounted sinks not recommended
Stainless Steel
- Complimentary to many of today's stainless steel appliances
- Stain and heat-resistant
- Can be scratched or dented
- Other metal countertops fall in this category: copper, pewter, zinc
Solid Surfaces
- Can look like natural stone
- Less expensive and require less maintenance than real stone
- Can be created with no seams
- Heat and moisture resistant
- Easy to Clean
- Can be scorched and scratched
If you are looking to remodel your kitchen, give me a call or send me an e-mail and we will put you in touch with some experts in the field.
Subscribe to:
Posts (Atom)